Digital 1:32 Track

Contents:
2 - 1/3 straight pieces of track, approximately 4.5 in. or 11.4 cm each
Track connection clips

Can be used with the following systems :
Evolution 1/32
Digital 132/124

2/30 High Bank Curve Will fit directly outside of a 1/30 high banked curve. Can be used on a 2, 4, 6 or 8 lane track. Contents: 6 - 2/30 curves (6 pieces make a 180 curve) Track connection clips High bank supports Radius of Inside edge of track 15.75 in (40 cm) Radius of Outside edge of track 23.62 in (60 cm) Outside diameter of curve track 45.5 in (115.57 cm) Can be used with the following systems : Evolution 1/32 Digital 132/124

Contents :
6 Inside shoulders
2 End pieces/Connection section
Track connection clips

Compatible with the following systems :
Evolution 1/32
Digital 132/124

Contents:
1 - Adapter Unit, 13.53 inches (34.5 cm)

The following digital accessories can be plugged into this adapter piece of track:
Display Driver (30353)
Start light (30354)
Position Tower (30357)


This accessory fits the following system:
Carrera DIGITAL 132/124

These accessories also fit to the following systems: Carerra Evolution Carrera DIGITAL 132 Carrera DIGITAL 124

Curve 1: 1 piece = 30 degrees Contents: 6 pieces = 180 degrees

Digital Chicane, right

This piece can be used on a 2 lane digital track or (with 30351) can be used to expand your 2 lane digital 132/124 layout into 4 lanes.
Please note when expanding from 2 - 4 lanes and using a lap counter, all cars will need to pass thru lanes 1 and 2 (w/the black box or control unit) in order for the laps to register. You can take a look at the 3rd and 4th image to view the expansion.

Contents : 2 Left end pieces 2 Right end pieces Track connection clips Compatible with the following systems : Evolution 1/32 Digital 132/124

Contents :
2 Left end pieces
2 Right end pieces
Track connection clips

Compatible with the following systems :
Evolution 1/32
Digital 132/124

Will fit directly outside of a 3/30 high banked curve. Can be used on a 2, 4, 6 or 8 lane track.

Contents:
12 - 4/15 curves (12 pieces make a 180 curve)
Track connection clips
High bank supports

Radius of Inside edge of track 31.5 in (80 cm)
Radius of Outside edge of track 39.37 in (100 cm)
Outside Diameter of 180° turn : 78.74 in (200 cm)

Can be used with the following systems :
Evolution 1/32
Digital 132/124

Contents :
12 Inside shoulders
2 End pieces/Connection section
Track connection clips

Compatible with the following systems :
Evolution 1/32
Digital 132/124

Contents :
6 Inside shoulders
2 End pieces/Connection section
Track connection clips

Compatible with the following systems :
Evolution 1/32
Digital 132/124

Contents :
6 Inside shoulders
2 End pieces/Connection section
Track connection clips

Compatible with the following systems :
Evolution 1/32
Digital 132/124

Contents :
1 - standard straight with lane change
1 - 1/60 curve with lane change
Track connection clips

Can be used with the following systems :
Digital 132/124

Contents :
1 - standard straight with lane change
1 - 1/60 curve with lane change
Track connection clips



Can be used with the following systems :
Digital 132/124

Contents :
1 - Right lane change section, 2 pieces of track (changes from outside to inside lane)
Track connection clips

*Total length when added to your layout is 27.16" or 69 cm (length of 2 standard straights)

Can be used with the following systems :
Digital 132/124

Contents :
12 Outside shoulders
2 End pieces/Connection section
Track connection clips

Compatible with the following systems :
Evolution 1/32
Digital 132/124

Contents :
6 Outside shoulders
2 End pieces/Connection section
Track connection clips

Compatible with the following systems :
Evolution 1/32
Digital 132/124

Contents:
6 Outside shoulders
2 End pieces/Connection section
Track connection clips

Compatible with the following systems :
Evolution 1/32
Digital 132/124

Contents :
6 Outside shoulders
2 End pieces/Connection section
Track connection clips

Compatible with the following systems :
Evolution 1/32
Digital 132/124